Pass Your Exam With 100% Verified 301a Exam Questions
301a Dumps PDF - 301a Real Exam Questions Answers
F5 301a Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 24
Refer to the exhibit.
An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown.
The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80.
Which two objects will show an increase in Local Traffic statistics connections?
- A. VS_A&SNAT_B
- B. VS_A & SNAT A
- C. VS_ B & SNAT A
- D. VS_B&SNAT_B
Answer: A
NEW QUESTION 25
A new iRule needs to be tested. The LTM Specialist needs to measure page load times and monitor potential changes in memory usage A load test is scheduled.
Which two features should the LTM Specialist use to monitor these requirements? (Choose two.)
- A. Tmsh show sys provision
Explanation
Need to detect memory changes in real time, use to Page load times with Analytics profile - B. Tmsh show sys proc-info
- C. Tmsh show memory
- D. Analytics
Answer: B,D
NEW QUESTION 26
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?
- A. Least Sessions
- B. Least Connections
- C. Predictive
- D. Ratio
Answer: C
NEW QUESTION 27
An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms. All pool members are already assigned to another pool for load balancing FTP traffic.
Which load balancing method is most effective when the LTM Specialist sets up the pool?
- A. Predictive member)
- B. Least Connections (node)
- C. Round Robin
- D. Observed (node)
Answer: D
NEW QUESTION 28
What should an LTM Specialist configure on an LTM device to send AVR notification emails?
- A. Syslog on the LTM device to send to an SMTP server
- B. Custom SNMP traps on the LTM device for AVR notifications
- C. Email notification to be sent via SMTP from the LTM device
- D. Email notification to be sent via iControl from the LTM device
Answer: C
NEW QUESTION 29
Refer to the exhibit.
A pool is contoured with four members. A user has a current connection established with 10.18.1.40. The virtual server has a persistence Profile configured.
- A. 10.18.1.20
- B. 10.18.1.30
- C. 10.18.1.40
- D. 10.18.1.10
Answer: C
NEW QUESTION 30
One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.
Which configuration item enables this behavior?
- A. Gateway pool
- B. Gateway pool monitor
- C. Gateway Fail Safe
- D. iRule
Answer: C
NEW QUESTION 31
Four members in a server pool have similar hardware platforms. An LTM Specialist needs the load balancing method that can select the server with the fewest entries in the persistence table.
Which load balancing method should the LTM Specialist use?
- A. Dynamic Ratio
- B. Observed
- C. Least Sessions
- D. Leas Connections
Answer: C
Explanation:
Pay attention to the examination questions, the stem is to ask the session to keep the minimum entries in the table.
NEW QUESTION 32
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?
- A. # tmsh create pool http_pool members {10.10.10.101:80}
- B. # tmsh create itm pool http_pool member {10.10.10.101:80}
- C. # tmsh create pool http_pool members add {10.10.10.101:80}
- D. # tmsh create it pool http_pool members {10.10.10.101:80}
Answer: D
Explanation:
The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}
NEW QUESTION 33
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?
- A. SNAT address
- B. NAT pool
- C. SNAT pool
- D. NAT address
Answer: C
NEW QUESTION 34
Exhibit.
- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: D
NEW QUESTION 35
Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device.
What are the required profile and persistence settings for a standard virtual server?
- A. tcp, ctientsst, ftp serverssl persistence
- B. tcp, clientssl, serverssl persistence
- C. tcp - no persistence profile will be used
- D. tcp, ftp - Source address persistence
Answer: D
NEW QUESTION 36
An LTM Specialist reports that an application si no longer reachable after it has been upgraded.
Nothing has been changed in the configuration on the LTM device.
The logs indicates that health monitors to all servers have failed as shown:
What should the LTM Specialist verify next?
- A. That the custom receive string for the HTTP monitor has changed with the upgrade
- B. That the can still ping the servers from te BIG_ IP device.
- C. That the TCP hand shake with the servers is stall completed using tcpdump
- D. That the firewall between the BIG-ip device and servers is still allowing HTTP
Answer: A
Explanation:
The log shows that tcp detection is normal, but http detection is abnormal. So we should pay attention to the detection problem of http level
NEW QUESTION 37
Refer to the exhibit
Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?
- A. 10.1.1.2 0
- B. 72.10.1.1
- C. 10.1.1.1
- D. 10.1.1.3
Answer: D
NEW QUESTION 38
The picture belongs to static content, you can configure static content cache in FS to meet this demand An LTM Specialist must configure session persistence for a highly available, highly utilized web-based application.
* The following requirements are provided:
* http proxy setup for security
persistence information available to the HA peer in case of failover
The LTM Specialist needs to minimize additional burden on the LTM device to the greatest extent possible.
Which persistence profile should be used?
- A. Cookie insert
- B. Source Address Affinity
- C. Destination Address Affinity
- D. Universal
Answer: A
NEW QUESTION 39
......
Exam Topics of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
The following will be discussed in this section:
Understand the processes of licensing, license reactivation, and license modification (add-ons)
Manage software images
Use BIG-IP tools in order to identify potential performance issues
Distinguish between disabling a member and forcing it down
Given an HA pair, describe the appropriate strategy for deploying a new software image
Given a proposed virtual server configuration change, outline the scope of the change and for which connections those changes will affect (active connections, new connections, persisted sessions)
Establish the frequency of a given issue (random, continuous, isolated, intermittent, repetitive intervals)
Explain how to create a user U/A
Given a scenario, discuss when it is appropriate to create a UCS archive
Understand how to get performance statistics in addition to the those shown in the dashboard (Overview - Performance)
Explain how to modify user properties
Identify which high-level tasks can be automated using BIG-IQ
Given a situation where a virtual server configuration change did not appear to immediately take effect, determine why
Determine use cases for disabling a member
Determine use cases for forcing down a member
Recognize when a packet capture is needed within the context of a performance issue
Identify which modules are licensed and/or provisioned U/A
Differentiate between performance issue types (i.e. Latency, Congestion, broken content)
Create and restore a UCS archive under the appropriate circumstances
301a Dumps 100 Pass Guarantee With Latest Demo: https://prep4sure.dumpexams.com/301a-vce-torrent.html