[Jan-2024] 300-610 Exam Dumps Pass with Updated 2024 Designing Cisco Data Center Infrastructure
Free 300-610 Exam Dumps to Pass Exam Easily
NEW QUESTION # 51
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 52
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
- A. Interfaces that belong to VRFs can be physical or logical.
- B. Overlapping IP addresses are permitted on different VRFs.
- C. VRF-Lite interfaces support MPLS.
- D. VRF-Lite interfaces can be Layer 2.
- E. Layer 3 interfaces can belong to multiple VRFs.
Answer: A,B
NEW QUESTION # 53
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION # 54
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
- A. Connect the VDCs to an external Layer 3 device.
- B. Cross-connect the ports between the VDCs.
- C. Create VRF-aware software infrastructure interfaces.
- D. Create interfaces in the VDC that can be accessed by another VDC.
- E. Create a policy map in the default VDC that routes traffic between the VDCs.
Answer: A,B
Explanation:
The Cisco NX-OS software does not support direct communication between VDCs on a single physical device. You must make a physical connection from a port allocated to one VDC to a port allocated to the other VDC to allow the VDCs to communicate.
NEW QUESTION # 55
An engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including Cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.
Which tool meets these requirements?
- A. Cisco UCS Director
- B. Cisco Data Center Network Manager
- C. Cisco Intersight
- D. Cisco Tetration
Answer: C
Explanation:
D18912E1457D5D1DDCBD40AB3BF70D5D
NEW QUESTION # 56
A network engineer is implementing Cisco UCS Manager with Cisco UCS Central integration. The company's strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS Manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS Manager.
Which two profiles must be used to meet these requirements? (Choose two.)
- A. public network control
- B. restricted chassis
- C. local service
- D. local power
- E. global maintenance
Answer: A,C
NEW QUESTION # 57
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. N Port virtualization
- B. end-to-end oversubscription ratio
- C. type of storage
- D. FCoE protocol
Answer: B
NEW QUESTION # 58
The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection. A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:
The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.
The ITD service is provided for inside and outside segments of the firewall.
Which ITD deployment mode must be implemented to meet these requirements?
- A. server load-balancing deployment mode
- B. server vPC deployment mode
- C. one-arm deployment mode
- D. sandwich deployment mode
Answer: C
NEW QUESTION # 59
An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.
Which identifier must be used?
- A. 20:00:00:25:B5:97:c3:ac
- B. iqn.2021-08.com.acme:3xxx
- C. fe80::314e:4566:8702:bf3d
- D. naa.600a09840691712159764d
Answer: A
NEW QUESTION # 60
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. NPIV feature on the Cisco MDS Series
- B. end-host mode feature on the Cisco UCS Fabric Interconnects
- C. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- D. NPV feature on the Cisco MDS Series.
- E. Smart Zoning feature on the Cisco UCS Fabric Interconnects
Answer: A,D
Explanation:
Section: Compute Design
NEW QUESTION # 61
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. on the host, by using multipathing software
- B. in the hardware on any Cisco UCS VIC adapter
- C. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- D. in the hardware on the Cisco UCS VIC 12xx adapter or later
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION # 62
An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.
Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)
- A. many NVE to one multicast group
- B. many VNI to many multicast groups
- C. one NVE to many multicast groups
- D. one VNI to one multicast group
- E. many VNI to one multicast group
Answer: A,E
NEW QUESTION # 63
A confidentially and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used. Which technology must be used to support these requirements?
- A. GRE
- B. OTV
- C. MACsec
- D. IPsec
Answer: C
Explanation:
The key to solution is "Ethernet frames". Frames are layer 2. IPsec encrypts at layer 3.
NEW QUESTION # 64
Refer to the exhibit.
The security team created a new security policy that requires certain types of traffic to be subject to deep packet inspection The traffic types are
* internet traffic to application servers
* internet traffic to corporate users
* partner network traffic to application servers
* partner network traffic to corporate users
Where must the next-generation firewalls be inserted to implement the new policy?
- A. inline insertion between the edge router duster and the core switch duster
- B. inline insertion between the user network switch cluster and the core cluster
- C. one-armed insertion from the core switch cluster
- D. one-armed insertion from the ACl border leaf duster
Answer: D
NEW QUESTION # 65
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.
Which solution meets these requirements?
- A. 1) Enable new routing instances for the testing and development environments in the same VDC.
2) Control reachability by using firewall access policies. - B. 1) Create a separate VRF for the testing and development environments.
2) Control reachability by using firewall access policies. - C. 1) Create a VRF for the testing and development environments.
2) Use ACLs to control traffic between the two environments. - D. 1) Assign a separate VDC for the testing and development environments.
2. Place a firewall between the VDCs.
Answer: B
NEW QUESTION # 66
Which pools are used when a vNIC template is created in Cisco UCS Manager?
- A. IP
- B. MAC
- C. UUID
- D. WWPN
Answer: B
NEW QUESTION # 67
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects?
(Choose two.)
- A. STP runs on the uplink ports of each VLAN, as defined by MSTP.
- B. STP runs on the server ports.
- C. The STP parameter configuration is supported.
- D. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
- E. The STP parameter configuration is unsupported.
Answer: D,E
NEW QUESTION # 68
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have access to its own VRF instance.
Which interface should be used to meet these requirements?
- A. management interface
- B. loopback interface
- C. interface VLAN
- D. physical interface
Answer: A
NEW QUESTION # 69
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server.
Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
- A. PAgP mode desirable
- B. PAgP mode auto
- C. LACP mode auto
- D. LACP mode active
Answer: D
NEW QUESTION # 70
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS C-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements:
Provide multipathing and high availability in the event of a critical path failure.
Be cost-effective and not require the purchase of new equipment.
Which two components must be selected to meet these requirements? (Choose two.)
- A. uplink pinning
- B. system VLAN
- C. hardware iSCSI NIC
- D. storage binding
- E. software iSCSI adapter
Answer: D,E
NEW QUESTION # 71
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
- A. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
- B. Each VDC has a unique out-of-band IP address from the same IP subnet.
- C. Each VDC has a dedicated out-of-band Ethernet management port.
- D. All the VDC have the same out-of-band IP address.
Answer: B
Explanation:
Section: Network Design
NEW QUESTION # 72
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 73
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION # 74
Refer to the exhibit.
The Cisco Nexus Series Switch with hostname Nexus! is the default gateway for server A and server B Both servers must have reachability to the internet; however, server A internet traffic must pass through the firewall for deep packet inspection. Also, the firewall must inspect any communication between server A and server B.
Which solution must be applied to separate the data plane path for server A and server B?
- A. VRF
- B. VLAN
- C. VXLAN
- D. VDC
Answer: A
NEW QUESTION # 75
......
300-610 Exam Dumps, 300-610 Practice Test Questions: https://prep4sure.dumpexams.com/300-610-vce-torrent.html