[Jan 09, 2022] Get Free Updates Up to 365 days On Developing AZ-500 Braindumps
Best Quality Microsoft AZ-500 Exam Questions
NEW QUESTION 173
You are implementing conditional access policies.
You must evaluate the existing Azure Active Directory (Azure AD) risk events and risk levels to configure and implement the policies.
You need to identify the risk level of the following risk events:
Users with leaked credentials
Impossible travel to atypical locations
Sign ins from IP addresses with suspicious activity
Which level should you identify for each risk event? To answer, drag the appropriate levels to the correct risk events. Each level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 174
You have the Azure virtual machines shown in the following table.
Each virtual machine has a single network interface.
You add the network interface of VM1 to an application security group named ASG1.
You need to identify the network interfaces of which virtual machines you can add to ASG1.
What should you identify?
- A. VM2, VM3, VM4, and VM5
- B. VM2 only
- C. VM2, VM3, and VM5 only
- D. VM2 and VM3 only
Answer: D
Explanation:
Section: [none]
Explanation/Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/application-security-groups
NEW QUESTION 175
You have an Azure Active Directory (Azure AD) tenant named contoso.com. The tenant contains the users shown in the following table.
You configure an access review named Review1 as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: User3 only
Use the Members (self) option to have the users review their own role assignments.
Box 2: User3 will receive a confirmation request
Use the Should reviewer not respond list to specify what happens for users that are not reviewed by the reviewer within the review period. This setting does not impact users who have been reviewed by the reviewers manually. If the final reviewer's decision is Deny, then the user's access will be removed.
No change - Leave user's access unchanged
Remove access - Remove user's access
Approve access - Approve user's access
Take recommendations - Take the system's recommendation on denying or approving the user's continued access References:
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-how-to-start-
NEW QUESTION 176
You have an Azure subscription that contains an Azure Active Directory (Azure AD) tenant and a user named User1.
The App registrations settings for the tenant are configured as shown in the following exhibit.
You plan to deploy an app named App1.
You need to ensure that User1 can register App1 in Azure AD. The solution must use the principle of least privilege.
Which role should you assign to User1?
- A. App Configuration Data Owner for the subscription
- B. Managed Application Contributor for the subscription
- C. Application developer in Azure AD.
- D. Cloud application administrator in Azure AD
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/roles/delegate-by-task
NEW QUESTION 177
You have the Azure Information Protection conditions shown in the following table.
You need to identify how Azure Information Protection will label files.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://docs.microsoft.com/en-us/azure/information-protection/configure-policy-classification
NEW QUESTION 178
You have five Azure subscriptions linked to a single Azure Active Directory (Azure AD) tenant.
You create an Azure Policy initiative named SecurityPolicyInitiative1.
You identify which standard role assignments must be configured on all new resource groups.
You need to enforce SecurityPolicyInitiative1 and the role assignments when a new resource group is created.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Create an Azure Blueprints definition.
2 - Publish an Azure Blueprints version
3 - Assign an Azure blueprint.
Reference:
https://docs.microsoft.com/en-us/azure/governance/blueprints/create-blueprint-portal
https://docs.microsoft.com/en-us/azure/azure-australia/azure-policy
NEW QUESTION 179
You have the Azure virtual networks shown in the following table.
You have the Azure virtual machines shown in the following table.
The firewalls on all the virtual machines allow ping traffic.
NSG1 is configured as shown in the following exhibit.
Inbound security rules
Outbound security rules
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: Yes
VM1 and VM3 are on peered VNets. The firewall rules with a source of ASG1 and ASG2 allow 'any' traffic on 'any' protocol so pings are allowed between VM1 and VM3.
Box 2: No
VM2 and VM4 are on separate VNets and the VNets are not peered. Therefore, the pings would have to go over the Internet. VM4 does have a public IP and the firewall allows pings. However, for VM2 to be able to ping VM4, VM2 would also need a public IP address. In Azure, pings don't go out through the default gateway as they would in a physical network. For an Azure VM to ping external IPs, the VM must have a public IP address assigned to it.
Box 3: Yes
VM3 has a public IP address and the firewall allows traffic on port 3389.
NEW QUESTION 180
You have an Azure Container Registry named ContReg1 that contains a container image named image1.
You enable content trust for ContReg1.
After content trust is enabled, you push two images to ContReg1 as shown in the following table.
Which images are trusted images?
- A. image1 and image2 only
- B. image2 only
- C. image1, image2, and image3
Answer: B
Explanation:
Explanation
Azure Container Registry implements Docker's content trust model, enabling pushing and pulling of signed images.
To push a trusted image tag to your container registry, enable content trust and push the image with docker push.
To work with trusted images, both image publishers and consumers need to enable content trust for their Docker clients. As a publisher, you can sign the images you push to a content trust-enabled registry.
Reference:
https://docs.microsoft.com/en-us/azure/container-registry/container-registry-content-trust
NEW QUESTION 181
You are troubleshooting a security issue for an Azure Storage account.
You enable the diagnostic logs for the storage account.
What should you use to retrieve the diagnostics logs?
- A. Azure Storage Explorer
- B. File Explorer in Windows
- C. Azure Security Center
- D. SQL query editor in Azure
Answer: A
Explanation:
If you want to download the metrics for long-term storage or to analyze them locally, you must use a tool or write some code to read the tables. You must download the minute metrics for analysis. The tables do not appear if you list all the tables in your storage account, but you can access them directly by name. Many storage-browsing tools are aware of these tables and enable you to view them directly (see Azure Storage Client Tools for a list of available tools).
Microsoft provides several graphical user interface (GUI) tools for working with the data in your Azure Storage account. All of the tools outlined in the following table are free.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-analytics-metrics?toc=%2fazure%2fstorage%
2fblobs%2ftoc.json
https://docs.microsoft.com/en-us/azure/storage/common/storage-explorers
NEW QUESTION 182
From Azure Security Center, you create a custom alert rule.
You need to configure which users will receive an email message when the alert is triggered.
What should you do?
- A. From Azure Active Directory (Azure AD), modify the members of the Security Reader role group.
- B. From Security Center, modify the alert rule.
- C. From Security Center, modify the Security policy settings of the Azure subscription.
- D. From Azure Monitor, create an action group.
Answer: D
Explanation:
Section: [none]
Explanation/Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/action-groups
NEW QUESTION 183
You have an Azure Active Directory (Azure AD) tenant named contoso1812.onmicrosoft.com that contains the users shown in the following table.
You create an Azure Information Protection label named Label1. The Protection settings for Label1 are configured as shown in the exhibit. (Click the Exhibit tab.)
Label1 is applied to a file named File1.
For each of the following statements, select Yes if the statement is true, Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 184
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.
You create and enforce an Azure AD Identity Protection user risk policy that has the following settings:
* Assignment: Include Group1, Exclude Group2
* Conditions: Sign-in risk of Medium and above
* Access: Allow access, Require password change
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: Yes
User1 is member of Group1. Sign in from unfamiliar location is risk level Medium.
Box 2: Yes
User2 is member of Group1. Sign in from anonymous IP address is risk level Medium.
Box 3: No
Sign-ins from IP addresses with suspicious activity is low.
Note:
Azure AD Identity protection can detect six types of suspicious sign-in activities:
* Users with leaked credentials
* Sign-ins from anonymous IP addresses
* Impossible travel to atypical locations
* Sign-ins from infected devices
* Sign-ins from IP addresses with suspicious activity
* Sign-ins from unfamiliar locations
These six types of events are categorized in to 3 levels of risks - High, Medium & Low:
References:
http://www.rebeladmin.com/2018/09/step-step-guide-configure-risk-based-azure-conditional-access-policies/
NEW QUESTION 185
You need to ensure that when administrators deploy resources by using an Azure Resource Manager template, the deployment can access secrets in an Azure key vault named KV11597200.
To complete this task, sign in to the Azure portal.
Answer:
Explanation:
See the explanation below.
Explanation
You need to configure an option in the Advanced Access Policy of the key vault.
* In the Azure portal, type Azure Key Vault in the search box, select Azure Key Vault from the search results then select the key vault named KV11597200. Alternatively, browse to Azure Key Vault in the left navigation pane.
* In the properties of the key vault, click on Advanced Access Policies.
* Tick the checkbox labelled Enable access to Azure Resource Manager for template deployment.
* Click Save to save the changes.
NEW QUESTION 186
You have a web app named WebApp1.
You create a web application firewall (WAF) policy named WAF1.
You need to protect WebApp1 by using WAF1.
What should you do first?
- A. Deploy an Azure Front Door.
- B. Add an extension to WebApp1.
- C. Deploy Azure Firewall.
Answer: A
Explanation:
Section: [none]
Explanation/Reference:
https://docs.microsoft.com/en-us/azure/frontdoor/quickstart-create-front-door
NEW QUESTION 187
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Azure Username: [email protected]
Azure Password: Ag1Bh9!#Bd
The following information is for technical support purposes only:
Lab Instance: 10598168
You need to collect all the audit failure data from the security log of a virtual machine named VM1 to an Azure Storage account.
To complete this task, sign in to the Azure portal.
This task might take several minutes to complete You can perform other tasks while the task completes.
See the explanation below.
Answer:
Explanation:
Explanation
Step 1: Create a workspace
Azure Monitor can collect data directly from your Azure virtual machines into a Log Analytics workspace for detailed analysis and correlation.
1. In the Azure portal, select All services. In the list of resources, type Log Analytics. As you begin typing, the list filters based on your input. Select Log Analytics workspaces.
2. Select Create, and then select choices for the following items:
3. After providing the required information on the Log Analytics workspace pane, select OK.
While the information is verified and the workspace is created, you can track its progress under Notifications from the menu.
Step 2: Enable the Log Analytics VM Extension
Installing the Log Analytics VM extension for Windows and Linux allows Azure Monitor to collect data from your Azure VMs.
1. In the Azure portal, select All services found in the upper left-hand corner. In the list of resources, type Log Analytics. As you begin typing, the list filters based on your input. Select Log Analytics workspaces.
2. In your list of Log Analytics workspaces, select DefaultWorkspace (the name you created in step 1).
3. On the left-hand menu, under Workspace Data Sources, select Virtual machines.
4. In the list of Virtual machines, select a virtual machine you want to install the agent on. Notice that the Log Analytics connection status for the VM indicates that it is Not connected.
5. In the details for your virtual machine, select Connect. The agent is automatically installed and configured for your Log Analytics workspace. This process takes a few minutes, during which time the Status shows Connecting.
After you install and connect the agent, the Log Analytics connection status will be updated with This workspace.
Reference: https://docs.microsoft.com/en-us/azure/azure-monitor/learn/quick-collect-azurevm
NEW QUESTION 188
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.
You create and enforce an Azure AD Identity Protection user risk policy that has the following settings:
* Assignment: Include Group1, Exclude Group2
* Conditions: Sign-in risk of Medium and above
* Access: Allow access, Require password change
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: Yes
User1 is member of Group1. Sign in from unfamiliar location is risk level Medium.
Box 2: Yes
User2 is member of Group1. Sign in from anonymous IP address is risk level Medium.
Box 3: No
Sign-ins from IP addresses with suspicious activity is low.
Note:
Azure AD Identity protection can detect six types of suspicious sign-in activities:
* Users with leaked credentials
* Sign-ins from anonymous IP addresses
* Impossible travel to atypical locations
* Sign-ins from infected devices
* Sign-ins from IP addresses with suspicious activity
* Sign-ins from unfamiliar locations
These six types of events are categorized in to 3 levels of risks - High, Medium & Low:
References:
http://www.rebeladmin.com/2018/09/step-step-guide-configure-risk-based-azure-conditional-access-policies/
NEW QUESTION 189
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Subscription named Sub1. Sub1 contains an Azure virtual machine named VM1 that runs Windows Server 2016.
You need to encrypt VM1 disks by using Azure Disk Encryption.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/encrypt-disks
NEW QUESTION 190
You have an Azure subscription that contains 100 virtual machines and has Azure Security Cent,-. Standard tier enabled.
You plan to perform a vulnerability scan of each virtual machine.
You need to deploy the vulnerability scanner extension to the virtual machines by using an Azure Resource Manager template.
Which two values should you specify in the code to automate the deployment of the extension to the virtual machines? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. the workspace ID
- B. the system-assigned managed identity
- C. the Azure Active Directory (Azure AD) ID
- D. the Key Vault managed storage account Key
- E. the primary shared key
- F. the user assigned managed identity
Answer: C,F
Explanation:
https://docs.microsoft.com/en-us/azure/azure-arc/servers/onboard-service-principal
NEW QUESTION 191
Your network contains an on-premises Active Directory domain named corp.contoso.com.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com.
You sync all on-premises identities to Azure AD.
You need to prevent users who have a givenName attribute that starts with TEST from being synced to Azure AD. The solution must minimize administrative effort.
What should you use?
- A. Active Directory Users and Computers
- B. the Azure AD Connect wizard
- C. Web Service Configuration Tool
- D. Synchronization Rules Editor
Answer: D
Explanation:
Explanation
Use the Synchronization Rules Editor and write attribute-based filtering rule.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-sync-change-the-configuration
NEW QUESTION 192
You have an Azure Active Directory (Azure AD) tenant that contains the users shown in the following table.
From Azure AD Privileged Identity Management (PIM), you configure the settings for the Security Administrator role as shown in the following exhibit.
From PIM, you assign the Security Administrator role to the following groups:
* Group1: Active assignment type, permanently assigned
* Group2: Eligible assignment type, permanently eligible
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: Yes
Eligible Type: A role assignment that requires a user to perform one or more actions to use the role. If a user has been made eligible for a role, that means they can activate the role when they need to perform privileged tasks. There's no difference in the access given to someone with a permanent versus an eligible role assignment. The only difference is that some people don't need that access all the time.
You can choose from two assignment duration options for each assignment type (eligible and active) when you configure settings for a role. These options become the default maximum duration when a user is assigned to the role in Privileged Identity Management.
Use the Activation maximum duration slider to set the maximum time, in hours, that a role stays active before it expires. This value can be from one to 24 hours.
Box 2: Yes
Active Type: A role assignment that doesn't require a user to perform any action to use the role. Users assigned as active have the privileges assigned to the role Box 3: Yes User3 is member of Group2.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-configure
https://docs.microsoft.com/bs-cyrl-ba/azure/active-directory/privileged-identity-management/pim-resource-roles
NEW QUESTION 193
SIMULATION
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Azure Username: [email protected]
Azure Password: Ag1Bh9!#Bd
The following information is for technical support purposes only:
Lab Instance: 10598168
You need to ensure that the rg1lod10598168n1 Azure Storage account is encrypted by using a key stored in the KeyVault10598168 Azure key vault.
To complete this task, sign in to the Azure portal.
- A. Step 1: To enable customer-managed keys in the Azure portal, follow these steps:
1. Navigate to your storage account rg1lod10598168n1
2. On the Settings blade for the storage account, click Encryption. Select the Use your own key option, as shown in the following figure.
Step 2: Specify a key from a key vault
To specify a key from a key vault, first make sure that you have a key vault that contains a key. To specify a key from a key vault, follow these steps:
4. Choose the Select from Key Vault option.
5. Choose the key vault KeyVault10598168 containing the key you want to use.
6. Choose the key from the key vault.
- B. Step 1: To enable customer-managed keys in the Azure portal, follow these steps:
1. Navigate to your storage account rg1lod10598168n1
2. On the Settings blade for the storage account, click Encryption. Select the Use your own key option, as shown in the following figure.
Step 2: Specify a key from a key vault
To specify a key from a key vault, first make sure that you have a key vault that contains a key. To specify a key from a key vault, follow these steps:
4. Choose the Select from Key Vault option.
5. Choose the key vault KeyVault10598168 containing the key you want to use.
6. Choose the key from the key vault.
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-encryption-keys-portal
NEW QUESTION 194
......
Difficulty in writing AZ-500 Exam
Microsoft Certified Azure Security Engineer Associate Certification helps Candidates in developing their professionals and academic career and It is a very tough task to pass Microsoft AZ-500 exam for those Candidates who have not done hard work and get some relevant Microsoft AZ-500 exam preparation material. There are many peoples have passed Microsoft AZ-500 exam by following these three things such as look for the latest Microsoft AZ-500 exam dumps, get relevant Microsoft AZ-500 exam dumps and develop their knowledge about Microsoft AZ-500 exam new questions. At the same time, it can also stress out some people as they found passing Microsoft AZ-500 exam a tough task. It is just a wrong assumption as many of the peoples have passed Microsoft AZ-500 exam questions. All you have to do is to work hard, get some relevant Microsoft AZ-500 exam preparation material and go thoroughly from them. Dumpexams is here to help you with this problem. We have the relevant Microsoft AZ-500 exam preparation material which are providing the latest Microsoft AZ-500 exam questions with the detailed view of every Microsoft AZ-500 exam topic. Dumpexams offered Microsoft AZ-500 exam dumps which are more than enough to pass the Microsoft AZ-500 exam questions. We are providing all thing such as Microsoft AZ-500 exam dumps, Microsoft AZ-500 practice test, and Microsoft AZ-500 pdf dumps that will help the candidate to pass the exam with good grades.
Microsoft Exam Practice Test To Gain Brilliante Result: https://prep4sure.dumpexams.com/AZ-500-vce-torrent.html