H12-831_V1.0-ENU Exam Dumps, H12-831_V1.0-ENU Practice Test Questions
PDF (New 2025) Actual Huawei H12-831_V1.0-ENU Exam Questions
Huawei H12-831_V1.0 certification exam is an advanced level exam that covers a wide range of topics related to datacom technology. It is designed to test the skills and knowledge of professionals who are responsible for the design, implementation, and management of complex datacom networks. H12-831_V1.0-ENU exam is divided into several sections, each of which covers a specific topic in detail.
NEW QUESTION # 74
As shown in the figure, on the R1 router, network administrator A sends the routing entry to R2 through the routing policy After modifying the MED value, you can control the path of traffic entering the AS100
- A. True
- B. False
Answer: A
NEW QUESTION # 75
For the same MA, C address, manually configured MA, C entries have higher priority than automatically generated entries.
- A. True
- B. False
Answer: A
NEW QUESTION # 76
BGP4+ carries the next hop address of the IPv6 route through the Next Hop attribute in the Update packet. (Moved into Attribute 14)
- A. False
- B. True
Answer: A
NEW QUESTION # 77
By default, the Domain ID of each OSPF process running on the router is the same as the process number of the process, which can be modified by the domain-id command under the process
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION # 78
When troubleshooting a network, if you need to confirm the business traffic path, which of the following may need to be done ()
- A. Investigate service traffic path planning in the network design phase
- B. Confirm the frequency of failure
- C. Confirm data link layer service traffic path
- D. Confirm the network layer service traffic path
Answer: A,C,D
NEW QUESTION # 79
Both VLAN aggregation and MUX VLAN are deployed on the enterprise network shown in the figure, and all switch interfaces connected to terminals are access interfaces. Given this, match PCI to PC4 with the hosts or servers that they can access on the network. (Note: A host cannot be matched with itself. For example, PCI cannot match PCI.) (Tokens can be reused.)
Answer:
Explanation:
NEW QUESTION # 80
In the topology shown in the figure, the entire network runsOSPFv3agreement inNoIn the case of attracting external routes,R1which type ofLAS?
- A. Link-LSA
- B. Inter-Area-Prefix-LSA
- C. Intra-Area-Prefix-LSA
- D. Inter-Area-Router LSA
Answer: D
NEW QUESTION # 81
BGP/MPLS IP VPNs can only use LDP to construct public network tunnels.
- A. False
- B. True
Answer: A
NEW QUESTION # 82
From this picture, we can judge
<Redisplay ipv6 routing table protocolTuozhen
Public Routing Table . ISIS
Summary Count 6
ISIS Routing Table's Status : < Active >
Summary Count 6
- A. R1The type of device is definitely notLevel-1
- B. R1noIS-ISofIPv6routing
- C. R1ofGigabitEthernetOD/1must be enabledIS-IS IPv6
- D. R1have6stripIS-ISofIPv6routing
Answer: A,C,D
NEW QUESTION # 83
On the OSPFv3 network shown in the figure, area 1 is a stub area, area 2 is a common area, and area 3 is an NSSA.
Which of the following LSAs is displayed only in area 2?
- A. Router-LSA
- B. Link-LSA
- C. Intra-Area-Prefix-LSA
- D. AS-External-LSA
Answer: D
NEW QUESTION # 84
If the BFD session goes down, the direct link will fail.
- A. False
- B. True
Answer: A
NEW QUESTION # 85
Network administrator A wants to use A, CL to match specific routing entries. Which of the following routing entries will be matched by the A, CL rules in the figure?
acl number 2000
rule 10 permit source 10.0.0.0 0.0.6.0
- A. 10.0.0.1/32
- B. 10.0.2.0/24
- C. 10.0.1.0/24:
- D. 10.0.0.0/24
Answer: B,D
NEW QUESTION # 86
Regarding BGP/MPLS IPVPN data forwarding, which of the following descriptions is wrong?
- A. The data sent by the PE to the CE is an IPv4 packet
- B. The outer label during data forwarding can be allocated by LDP
- C. When data is transmitted on the BCP/MPLS IPVPN backbone network, it always carries two layers of labels
- D. The inner label during data forwarding is assigned by MP-BGP
Answer: C
NEW QUESTION # 87
According to this picture, cooked I'] can be judged?
- A. R1ofGE0/0/1Interface is not enabledIS-IS IPv6
- B. R1ofGEO/O/OinterfaceIS-ISThe interface type isLevel-1-2
- C. R1ofGE0/0/1interfaceIS-ISThe interface type isLeve-1
- D. R1ofGEO/O/Ointerface is enabledIS-IS IPv6
Answer: B,D
NEW QUESTION # 88
As shown in the figure, in a medium-sized network, BGP generally deploys dual RRs to improve R reliability. When deploying dual RRs, the Cluster IDs of the two RRs are generally set to be the same. The reason for this is
- A. Prevent the client from receiving too many routes and causing it to run out of memory
- B. prevent suboptimal
- C. prevent loops
- D. Prevent RR from receiving too many routes and causing insufficient memory
Answer: D
NEW QUESTION # 89
What is the meaning of display current-configuration I include vlan command?
- A. View eachVLANphysical interface information bound to the
- B. View all included"VLAN"Configuration of keywords
- C. See what's currently createdVLAN
- D. CheckVLANIFinterfaceIPaddress
Answer: B
NEW QUESTION # 90
In the LDP session establishment process, the active party will first send the lnitialization information for parameter negotiation, and if the passive party does not accept the negotiation parameters, it will send _____ .
- A. Initialization Message
- B. Keepalive Message
- C. Hello Message
- D. Error Notification Message
Answer: D
NEW QUESTION # 91
Which of the following regarding the configuration description is wrong?
- A. Enabling the DHCP Snooping configuration can be used to prevent DHCP Server counterfeiters from attacking
- B. If the DHCP request message received by the GigabitEthemnet0/0/1 interface does not contain the SutOption information of Option82, the device will generate Option82 and insert it into the message
- C. Enabling the DHCP Snooping configuration can be used to prevent ARP spoofing attacks
- D. Configure GigabitEthernet0/0/1 as a trusted interface
Answer: C
NEW QUESTION # 92
When troubleshooting the EBGP neighbor relationship, you find that the two directly connected devices use the loopback interface to establish a connection, so execute display current-configuration configuration bgp to check the unitary setting of peer ebgp-max-hop hop-count, which of the following statements is correct?
- A. hop-countmust be greater than1
- B. hop-countmust be greater than255
- C. hop-countmust be greater than15
- D. hop-countmust be greater than2
Answer: A
NEW QUESTION # 93
......
Passing the Huawei H12-831_V1.0-ENU (HCIP-Datacom-Advanced Routing & Switching Technology V1.0) Exam is a valuable achievement for networking professionals looking to advance their careers. It demonstrates a high level of expertise in advanced routing and switching technology and validates the skills and knowledge required to design, deploy, and maintain complex networks.
Updated May-2025 Pass H12-831_V1.0-ENU Exam - Real Practice Test Questions: https://prep4sure.dumpexams.com/H12-831_V1.0-ENU-vce-torrent.html