[Dec 09, 2025] D-VXR-DS-00 Exam Dumps, D-VXR-DS-00 Practice Test Questions
Free D-VXR-DS-00 Study Guides Exam Questions and Answer
NEW QUESTION # 50
What are the minimum network bandwidths required for vSAN?
- A. 10 GbE for OSA, 25 GbE for ESA
- B. 1 GbE for OSE, 10 GbE for ESA
- C. 10 GbE for OSA, 10 GbE for ESA
Answer: A
Explanation:
For VxRail, vSAN requires a minimum of 10 GbE bandwidth for Older Software Architectures (OSA) and 25 GbE for Enhanced Software Architectures (ESA) to meet performance and reliability standards.
NEW QUESTION # 51
What are the benefits of using a vSphere Distributed Switch in a VxRail cluster?
(Choose two)
Response:
- A. Supports seamless traffic prioritization
- B. Enables dynamic IP allocation
- C. Simplifies cluster-wide network configuration
- D. Configures Fibre Channel zones
Answer: A,C
NEW QUESTION # 52
Which network settings must be configured in VxRail Manager during setup?
(Choose two)
Response:
- A. DNS and NTP server addresses
- B. VLAN for vSAN traffic
- C. RAID levels for storage groups
- D. Witness host IP for fault domains
Answer: A,B
NEW QUESTION # 53
What is the recommended network configuration for a VxRail Dynamic Node cluster?
Response:
- A. High-speed Ethernet with multiple uplinks
- B. Fibre Channel connectivity for storage
- C. Dual-switch network topology
- D. Dedicated storage VLANs
Answer: A
NEW QUESTION # 54
What is a key consideration when selecting nodes for a high-availability VxRail cluster?
Response:
- A. Redundant network interfaces
- B. Hybrid SSD and HDD configurations
- C. Balanced compute and memory resources
- D. High-density storage drives
Answer: C
NEW QUESTION # 55
What are two requirements for automatic node discovery? (Choose two.)
- A. The switches must be configured to allow IPv6 multicast traffic.
- B. The switches must be configured to allow IPv4 multicast traffic.
- C. The internal management VLAN must be configured on the switches for the nodes.
- D. The management IP addresses must be set on the nodes.
Answer: B,C
Explanation:
Automatic node discovery requires the internal management VLAN to be properly configured on the switches for node communication, and the switches must allow IPv4 multicast traffic to enable discovery protocols to function correctly.
NEW QUESTION # 56
Which two networking components are critical for VxRail deployment?
(Choose two)
Response:
- A. Fibre Channel adapters
- B. Ethernet-based connectivity
- C. Distributed switches
- D. VLAN-based management isolation
Answer: B,D
NEW QUESTION # 57
During the creation of a VxRail project, which components are critical for initial setup?
(Choose two)
Response:
- A. Static IP addresses for cluster nodes
- B. Witness node for 2-node clusters
- C. Management VLAN configuration
- D. Backup schedule configuration
Answer: A,C
NEW QUESTION # 58
What are three supported VxRail Stretched Cluster configuration? (Choose three.)
- A. Four nodes and a witness
- B. All flash on Site A and hybrid on Site B
- C. Two nodes and a witness
- D. vSAN ESA on Site A and vSAN OSA on Site B
- E. L2 and L3 site-to-site connectivity
Answer: A,C,E
Explanation:
Both Layer 2 (L2) and Layer 3 (L3) site-to-site connectivity are supported for VxRail stretched clusters.
Configurations with two nodes plus a witness and four nodes plus a witness are supported cluster sizes for stretched clusters, providing fault tolerance across sites.
NEW QUESTION # 59
Which factors are critical to consider during the physical installation of a VxRail cluster?
(Choose two)
Response:
- A. VMware vCenter version compatibility
- B. Network cable lengths
- C. Default RAID configuration
- D. Proper rack grounding
Answer: B,D
NEW QUESTION # 60
Which factors are considered by the VxRail Sizing Tool?
(Choose two)
Response:
- A. Network segmentation policies
- B. Compute resource requirements
- C. Data deduplication ratios
- D. Fibre Channel zoning settings
Answer: B,C
NEW QUESTION # 61
What type of network configuration does VxRail Manager require during the cluster setup process?
Response:
- A. Segregated networks for backup and recovery
- B. Fibre Channel zoning for storage traffic
- C. Dynamic IPs using DHCP for all traffic
- D. Static IPs for management and vSAN traffic
Answer: D
NEW QUESTION # 62
Which VxRail node features should be evaluated for workload optimization?
(Choose two)
Response:
- A. Preloaded operating system
- B. Physical size of the node
- C. CPU and memory capacity
- D. Disk group configuration
Answer: C,D
NEW QUESTION # 63
Which design consideration is critical when expanding an existing VxRail cluster?
Response:
- A. Replacing the witness host
- B. Reconfiguring fault domains
- C. Implementing additional vSAN deduplication rules
- D. Matching node types and configurations
Answer: D
NEW QUESTION # 64
What are three benefits of using the VxRail Configuration Portal? (Choose three.)
- A. Downloading drives for the confiqured VxRail Cluster
- B. Creating backup documentation for disaster recovery plans
- C. Validating the environment before deployment
- D. Validating the configuration settings
- E. Sharing configurations between project members
Answer: C,D,E
Explanation:
Validating the environment before deployment ensures readiness and reduces deployment issues.
Sharing configurations between project members facilitates collaboration and consistency.
Validating the configuration settings helps confirm correct setup prior to deployment.
NEW QUESTION # 65
What is the purpose of using a vSphere Distributed Switch during a VxRail deployment?
Response:
- A. Enables snapshot recovery
- B. Allocates node resources
- C. Configures data deduplication
- D. Simplifies traffic management across clusters
Answer: D
NEW QUESTION # 66
What are the benefits of running configuration validation in VxRail Manager?
(Choose two)
Response:
- A. Detects hardware inconsistencies
- B. Ensures compatibility with external storage systems
- C. Resolves IP conflicts in advance
- D. Prepares vSAN for deployment
Answer: A,D
NEW QUESTION # 67
Which key consideration is specific to designing a 2-node VxRail cluster?
Response:
- A. RAID level selection
- B. Support for Fibre Channel storage
- C. Witness host placement
- D. Dedicated backup traffic VLAN
Answer: C
NEW QUESTION # 68
An architect is designing a VxRail solution for a customer who needs vCenter HA.
Which vCenter Server platform options supports this requirement?
- A. Use a new VxRail-managed vCenter server
- B. Use an existing VxRail-managed vCenter server
- C. Use an existing Customer-supplied vCenter server
- D. Use an existing Customer-supplied vCenter server
Answer: A
Explanation:
Only a new VxRail-managed vCenter Server platform supports the built-in vCenter HA capability required for high availability in VxRail environments.
NEW QUESTION # 69
Which application package is by default included when using the VxRail Sizer Tool?
- A. vRealize Log Insight
- B. External VCenter
- C. DPS-Avamar
- D. Secure Connect Gateway
Answer: A
Explanation:
The VxRail Sizer Tool includes vRealize Log Insight by default as part of the application package for integrated log management and analytics in the VxRail environment.
NEW QUESTION # 70
An IT architect is designing the deployment of many VxRail 2-node clusters. The architect is planning to use a single shared witness, appliance for multiple 2-node clusters.
What is the maximum number of VxRail 2-node clusters supported by a single Shared Witness Appliance?
- A. 0
- B. 1
- C. 2
Answer: B
Explanation:
A single Shared Witness Appliance can support up to 64 VxRail 2-node clusters, enabling efficient management and resource consolidation in multi-cluster deployments.
NEW QUESTION # 71
Which consideration is unique to vSAN ESA design in VxRail clusters?
Response:
- A. All-flash storage support
- B. Fault domain configuration
- C. Witness host deployment
- D. VLAN segregation
Answer: A
NEW QUESTION # 72
What are two traffic types that must be configured during all VxRail cluster deployments? (Choose two.)
- A. Management
- B. vSAN
- C. Guest VM
- D. vMotion
Answer: A,B
Explanation:
Management and vSAN traffic types must always be configured during VxRail cluster deployments to ensure proper cluster operation and storage communication.
NEW QUESTION # 73
Which document from the VxRail Configuration Portal can be used to validate site readiness before a deployment?
- A. Configuration Report
- B. Pre-deployment Checklist
- C. Deployment Planning Guide
- D. Getting Started Guide
Answer: B
Explanation:
The Pre-deployment Checklist from the VxRail Configuration Portal is used to validate site readiness by ensuring all necessary prerequisites and environment conditions are met before deployment.
NEW QUESTION # 74
What are the benefits of using the VxRail design process?
(Choose two)
Response:
- A. Reduced physical rack space requirements
- B. Improved fault tolerance
- C. Optimized node performance
- D. Predictable deployment timelines
Answer: B,D
NEW QUESTION # 75
......
D-VXR-DS-00 Exam Dumps, D-VXR-DS-00 Practice Test Questions: https://prep4sure.dumpexams.com/D-VXR-DS-00-vce-torrent.html